Features of seat aluminum | Sandpiper Valve Seat Aluminum
Cemented carbide valve seats are used in various specifications and configurations, and can be used under wear, corrosive and corrosive conditions.
The following are the outstanding features of cemented carbide valve seats:
Corrosion resistance and wear resistance;
Longer working hours;
High pressure;
High dimensional accuracy;
Excellent endurance to thrust load and high temperature.
Suitable for most passenger cars, light and heavy trucks, diesel engines and stationary industrial engines.
Cast cemented carbide one by one.
The maximum strength is obtained under the lowest distortion, and the severe impact resistance and heat dissipation are good. Can work with all fuels.
It is easy to act on knives and stones.
In order to facilitate processing, the PEP valve seat is softened to the hardness of R/C 42, so that tools and stones can be freely combined, and the existing tools can be processed faster and cleaner.
Operate in the range of 1400 to 1500.
PEP valve seat has a higher working range than its competitive products. In today's hot-running motors, they allow for greater safety margins.
Harden during work.
In the initial working phase, the special cemented carbide will harden. The initial "soft" stage allows the valve to reach the correct seat.
Sandpiper Valve Seat Aluminum
